Monday to Saturday - 8:00 -17:30
The Toyota Prius is one of the most popular and reliable hybrids on the market. However, even the best cars have their quirks, and one of those is the battery in the key fob. If you’ve ever had your key fob die on you, you know how frustrating it can be.
Luckily, it’s easy to change the battery in a 2010 Toyota Prius key fob.
The 2010 Toyota Prius comes with a key fob that has a battery. This battery is used to start the car and open the doors. The key fob battery is located under the hood, in the glove box, or in the center console.
If your key fob battery dies, you can use a backup key to start the car.
2010 Toyota Prius Key Fob Battery Replacement
If you own a 2010 Toyota Prius, chances are good that you’re familiar with the key fob battery. These batteries tend to die quickly, and when they do, they can leave you stranded. Fortunately, replacing the battery is a fairly simple process that anyone can do.
The first step is to purchase a new battery. You’ll need a CR2032 lithium coin cell battery. Once you have the new battery, open up the key fob by removing the screw on the back.
Be careful not to lose this screw! With the back cover off, you should see the old battery still in place. Gently remove it and insert the new one in its place, being careful not to touch any of the exposed wires.
Replace the back cover and screw it into place, and your key fob should be as good as new!
Toyota Prius Key Fob Battery Replacement 2008
If you own a Toyota Prius, chances are good that you’re familiar with the key fob. The key fob is the small, handheld device that allows you to lock and unlock your car doors and trunk. It also has a built-in panic button in case of emergencies.
Like all battery-powered devices, the key fob’s battery will eventually die. When it does, you’ll need to replace it. Here’s how to do it:
1. Locate the small screw on the back of the key fob. Use a Phillips head screwdriver to remove the screw. 2. Carefully pry open the back of the key fob with a flathead screwdriver or knife.
Be careful not to damage any of the electronic components inside. 3. Remove the old battery and insert a new CR2032 coin cell battery in its place, making sure that the positive (+) side is facing up. If your key fob has a metal contact plate on top of the battery, be sure to align this with the positive side as well.
4..
Toyota Prius Key Fob Battery 2012
If you own a 2012 Toyota Prius, you may have noticed that your key fob isn’t working as well as it used to. This is most likely due to a dying battery. Fortunately, replacing the battery is a pretty easy process that you can do at home.
To start, locate the small release button on the back of the key fob. Press this button to open up the back cover of the fob. Inside, you’ll see a small coin-sized battery.
Remove this battery and replace it with a new one of the same size and type. Once the new battery is in place, close up the back cover and test out your key fob to see if it’s working properly again.
If your key fob still isn’t working after replacing the battery, there may be another issue going on such as a faulty connection or damaged circuitry.
In this case, it’s best to take your key fob to a qualified technician for further diagnosis and repairs.
2011 Toyota Prius Key Fob Battery Replacement
If your Toyota Prius key fob battery is running low, you may be wondering how to replace it. Fortunately, this process is relatively simple and only takes a few minutes. Here’s what you need to know about replacing the battery in your 2011 Toyota Prius key fob.
First, locate the small screw on the back of the key fob. Using a small Phillips head screwdriver, remove this screw and then pry open the back of the key fob casing. You should now see the battery inside (it will be labelled with a “+” sign).
Using a small flathead screwdriver or other similar tool, gently pry out the old battery and dispose of it properly. Then, take your new CR2032 coin cell battery and insert it into the key fob casing, making sure that the “+” side is facing up. Finally, replace the back cover of the key fob and secure it with the small screw.
That’s it – you’ve successfully replaced the battery in your 2011 Toyota Prius key fob!
Credit: paulstravelpictures.com
What Type of Battery Does a 2010 Prius Key Take?
If you have a 2010 Prius, the key fob battery is a CR2032. You can find this type of battery at any electronics store.
What Kind of Battery Does the Prius Key Fob Take?
The Prius key fob uses a CR2032 coin cell battery. This is a 3 volt lithium ion battery that is commonly used in small electronics. You can find them at most stores that sell batteries, and they are relatively inexpensive.
To replace the battery, simply remove the old one and put in a new one. Make sure to orient the new battery correctly so that it will work properly.
How Do I Change the Battery in My 2010 Prius Key Fob?
Assuming you would like a blog post titled “How to Change the Battery in Your 2010 Prius Key Fob”:
If your 2010 Prius key fob starts to act up, it might be time to change the battery. Here’s how:
1. Start by prying open the key fob with a small flathead screwdriver or knife. You should see a small hole on one side of the key fob – insert your tool into this hole and gently pry until the two halves of the key fob come apart.
It is held in place by a small metal clip – use your tool to carefully release the clip and remove the old battery. 3. Take note of which way the battery is positioned in the key fob – you will need to install the new battery in the same orientation. Install your new CR2032 button cell battery and replace the metal clip to hold it in place.
4. Finally, snap the two halves of the key fob back together and voila! You’ve just replaced your 2010 Prius key fob’s battery (hopefully without too much trouble).
What Kind of Battery Does a 2009 Prius Key Fob Take?
The 2009 Toyota Prius uses a CR2032 3-volt coin type battery in its key fob remote control. This is the same kind of battery that is used in many other types of devices such as watches, calculators and small electronic toys. The average lifespan of this type of battery is around three to five years, depending on how often it is used.
To replace the battery in your 2009 Toyota Prius key fob, simply remove the old one and insert a new one into the compartment. Make sure that the positive (+) side is facing up before you close the compartment.
Conclusion
If you own a Toyota Prius 2010, then you know that the key fob battery is an important part of the car. Without it, your car won’t start. If you’re having trouble with your key fob battery, then this blog post is for you.
We’ll go over some tips on how to change the battery and what to do if your key fob stops working.
