If you have a Prius with the red triangle of death, don’t panic. Here are some things you can try to reset it and get your car back up and running. First, check to see if there is anything obstructing the sensors on the front or rear of the car.
If there is, remove it and see if that clears the error. Next, try disconnecting and reconnecting the battery. This sometimes resets the system and clears the error.
Finally, if all else fails, you can always take it to a Toyota dealer and they can reset it for you.
- Park the car on a level surface and turn off the engine
- Press and hold the ” trip meter reset” button for about five seconds
- Turn on the engine and release the button when the message appears on the screen that says ” maintenance required
- Drive for about 500 miles to reset the maintenance light
How to Fix Red Triangle of Death Toyota Prius Easy Way
Prius Red Triangle With Exclamation Point
If you see a red triangle with an exclamation point on your Toyota Prius, it means that the vehicle needs to be brought in for servicing. The red triangle is a warning symbol that indicates that there is a problem with the vehicle. When this symbol appears, it means that the vehicle needs to be taken to a Toyota dealer or service center for inspection and repairs.
If you see this symbol, do not continue driving the vehicle and contact a Toyota dealer or service center as soon as possible.
How Do I Fix the Red Triangle on My Prius?
If your Toyota Prius has a red triangle with an exclamation point inside of it, this is the master warning light. It indicates that there is a system malfunction and you should take your car to a Toyota dealership for diagnosis and repair. Do not ignore this warning light as it could indicate a serious problem with your car.
What Does Red Triangle With Exclamation Point Mean in Prius?
If you see a red triangle with an exclamation point in your Toyota Prius, it means that the Vehicle Stability Control (VSC) system is active. The VSC system is designed to help keep your vehicle stable and under control while driving. If you see this warning light, it means that the VSC system is working to keep your vehicle stable.
How Do You Reset the Code on a Prius?
If you need to reset the code on your Prius, there are a few different ways that you can do it. One way is to disconnect the battery for about 10 minutes and then reconnect it. This should reset the code and allow you to start the car.
Another way is to use a OBDII scanner to clear the codes. You can usually find these scanners at auto parts stores or online.
What Does a Triangle With an Mean on a Prius?
A triangle with an exclamation point inside of it is the Toyota Prius’ symbol for low tire pressure. When this light comes on in the dash, it means that one or more of your tires are low on air and need to be filled up. Depending on how low they are, you may hear a chime as well.
If your red triangle Prius is giving you trouble, don’t worry! You can reset it with a few simple steps. First, find the 12-volt battery under the hood and disconnect the negative terminal.
Next, locate the fuse box inside the car and remove the “PWR” fuse. Finally, reconnect the battery and start the car. Your red triangle should be gone!