Gr86 Wheel Fitment

There are a lot of variables to consider when it comes to wheel fitment. offset, backspacing, width, and bolt pattern are just a few. It can be overwhelming, but we’re here to help!

We’ve put together a guide that will help you select the perfect wheels for your vehicle.

If you’re in the market for new wheels, you might be wondering what size and offset will fit your car. The answer isn’t always cut and dry, but there are a few general guidelines you can follow. Here’s a quick rundown on wheel fitment and how to make sure your next set of wheels is a perfect fit for your car.

One of the most important aspects of wheel fitment is the offset. This is the distance from the centerline of the wheel to the mounting surface. A positive offset means the mounting surface is closer to the outside edge of the wheel, while a negative offset means it’s closer to the inside edge.

Most factory-installed wheels have a positive offset, but it’s not always ideal for aftermarket wheels. A good rule of thumb is that an aftermarket wheel with too much positive offset will stick out past your fenders, while one with too much negative offset will sit too close to them. You’ll want to avoid both extremes if possible.

In general, a moderate amount of negative offset (around 20-30mm) works well on most cars. Another important factor in wheel fitment is width. Wheel widths have increased significantly in recent years, and many modern cars can accommodate fairly wide wheels without issue.

That said, wider isn’t always better—you don’t want your wheels sticking out so far that they rub against your fenders when turning or going over bumps in the road.

See also  High Idle After Cleaning Throttle Body

2022 Toyota GR86 Perfect Wheel Fitment!

Gr86 Wheel Specs

The Gr86 is a sports car that was jointly developed by Toyota and Subaru. It is the successor to the Toyota 86 and Subaru BRZ. The Gr86 is powered by a new 2.4-liter boxer engine that produces 232 hp and 184 lb-ft of torque.

It has a six-speed manual transmission or an optional six-speed automatic transmission. The Gr86 has a curb weight of 2,809 lbs (1,274 kg). The Gr86’s dimensions are as follows: it has a length of 4,265 mm (168 in), a width of 1,775 mm (70 in), and a height of 1,315 mm (52 in).

Its wheelbase is 2,570 mm (101 in) long. The front track width is 1,505 mm (59 in) while the rear track width is 1,510 mm (59 in). The Gr86 comes standard with 17-inch wheels.

18-inch wheels are available as an option. The tires are 215/45R17 for the front and 225/40R18 for the rear.

Gr86 Wheel Fitment


Does 18X9 Fit Gr86?

No, 18×9 does not fit GR86. The largest wheel that can be fitted on a GR86 is 17×7.5 +45.

What Wheels are on the Gr86?

The GR86 comes with a set of 18-inch aluminum alloy wheels that are exclusive to the model. These wheels are wrapped in summer performance tires for optimal grip and handling.

How Do I Find the Right Fitment for My Wheels?

The first step is to know the bolt pattern of your vehicle. The second step is to measure the width and offset of your wheels. Once you have those two measurements, you can start looking for wheels that will fit your car.

The width and offset are usually listed in millimeters (mm), so you’ll need to convert them to inches if you’re using an online search tool. To do that, just divide the width by 25.4 and the offset by 10. For example, if you have a wheel with a width of 7″ and an offset of 35mm, your search would look like this: “7×35 wheels.

See also  2001 Rav4 Transmission Fluid Capacity
If you’re still not sure which size to get, there are a few other factors to consider. First, think about the overall look you’re going for.

Do you want big and bold or sleek and sophisticated? Second, think about how much tire you want to show off – more tire generally means a smaller wheel. Finally, keep in mind that different brands offer different offsets, so make sure to do your research before settling on a set of wheels.

What Size are the Wheels for the 2022 Brz?

Assuming you are referring to the 2022 Subaru BRZ, according to the official website the wheels are 18″ x 8.5″.


If you’re looking to upgrade your car’s wheels, you’ll want to make sure you get the right fitment. Fitment is the term used to describe the relationship between a wheel and a car, and it’s important to get it right if you want your wheels to look good and perform properly. There are a few things you need to know about fitment before you start shopping for new wheels.

First, you need to know the bolt pattern of your car. The bolt pattern is the number of lug nuts on your wheel and the spacing between them. You can usually find this information in your owner’s manual or on the internet.

Second, you need to know the offset of your car’s wheels. The offset is the distance from the centerline of the wheel to the mounting surface. A positive offset means that the mounting surface is closer to the outside edge of the wheel, while a negative offset means that it’s closer to the inside edge.

Most cars have a positive offset, but it’s important to check yours just to be sure.

See also  Corolla Spark Plug Socket Size
Finally, you need to know what size tires you’ll be using with your new wheels. Tire size is expressed in inches, and it’s important that your tires are compatible with your wheels’ sizing so that they fit correctly and don’t rub against each other when driving.

You can usually find this information on tire sidewalls or in your owner’s manual as well. Armed with this knowledge, you’re ready to start shopping for new wheels! Just remember to pay attention to these three things – bolt pattern, offset, and tire size – and you’ll be sure to get a great fitment for your car.

Leave a Comment

Your email address will not be published. Required fields are marked *