Back Windshield Wiper Hanging down

The back windshield wiper on my car is hanging down. It’s not a big deal, but it’s annoying. I’m not sure how it happened, but I think it might have been because I hit a branch when I was driving through the woods last week.

Regardless of how it happened, it needs to be fixed. I tried to fix it myself, but I couldn’t figure out how to get the wiper blade off. I looked online for a tutorial, but all of the videos were for front wipers.

Finally, I found a video that showed me how to take the back wiper blade off. Once I got the blade off, I was able to see that the metal arm was bent and that’s what was causing the wiper to hang down.

If your back windshield wiper is hanging down, there’s no need to panic. This is a relatively easy problem to fix and shouldn’t take more than a few minutes of your time. Here’s what you’ll need to do:

1. Lift up the wiper arm so that it’s perpendicular to the windshield. 2. Use a flathead screwdriver or a similar tool to remove the retaining clip that holds the wiper blade in place. 3. Pull the wiper blade off of the arm and then proceed to clean both sides of the blade with a cloth or paper towel.

If the blade is excessively dirty, you can useWindex or another type of glass cleaner.

#i20 Rear Wiper Got Damaged!! How to fix it? Hyundai i20

Back Windshield Wiper Not Working

If your back windshield wiper isn’t working, there are a few things you can check before taking it in for service. First, make sure the blade is not frozen to the glass. If it is, gently thaw it with warm water.

Next, check the blade itself for any cracks or damage that might be preventing it from making good contact with the glass. If the blade looks damaged, replace it with a new one. Finally, check the wiper arm to see if it’s loose or bent.

If so, tighten or straighten it as needed. If none of these simple fixes work, then you’ll need to take your car in for service.

See also  2004 Corolla Headlight Bulb

How to Fix a Rear Windshield Wiper

If your rear windshield wiper doesn’t seem to be working properly, there are a few things you can do to fix it. First, check the fluid level in the reservoir. If it’s low, fill it up and see if that solves the problem.

If not, then you may need to clean or replace the blades. To do this, first remove the arm by unscrewing the nut that holds it in place. Then either clean the blades with soap and water or replace them altogether.

Once you’ve done that, reattach the arm and screw on the nut to secure it. Give your wipers a test run and they should be good as new!

How to Fix Rear Windshield Wiper Motor

If you have a rear windshield wiper motor that is not working, there are a few things that you can do to try and fix it. First, check the fuse box to see if the fuse for the rear wiper motor has blown. If it has, replace it with a new fuse and see if that fixes the problem.

If not, then there are a few other things that you can try. First, check to make sure that there is power getting to the rear wiper motor. You can do this by testing for continuity between the two wires coming from the motor.

If there is no continuity, then the problem is likely with either the wiring or the connector. If you have continuity between the two wires, then the next step is to test for ground. To do this, use a multimeter to test for continuity between one of the wires coming from the motor and a metal ground point on the car body.

If there is no continuity, then your problem is likely with either the wiring or connector again. Assuming that you have both power and ground at the rear wiper motor, then your problem lies within inthe actual motor itself. You will need to replace it with a new one in order to get your rear windshield wipers working again.

See also  Nissan Murano Years to Avoid

How to Adjust Rear Windshield Wiper Arm Tension

If your rear windshield wipers are leaving streaks or not making full contact with the windshield, you may need to adjust the arm tension. This is a quick and easy fix that anyone can do in a matter of minutes. Tools needed:

-Phillips head screwdriver -Pliers (optional) Instructions:

1. Locate the adjustment tab on the back of the wiper arm. It is usually a small plastic or metal tab near where the arm attaches to the blade. 2. Use a Phillips head screwdriver to loosen or tighten the tab as needed.

If you’re having trouble loosening the tab, you can try using pliers to get some extra leverage. 3. Test out the wiper by moving it back and forth across the windshield.

Back Windshield Wiper Hanging down


How Do You Tighten Back Windshield Wipers?

If your windshield wipers are loose and need to be tightened, there are a few things you can do. First, try tightening the bolts that hold the wiper arms to the motor. If that doesn’t work, you may need to replace the entire wiper motor.

Why Do People Tape down Their Back Windshield Wiper?

There are a few reasons that people might tape down their back windshield wiper. The most common reason is to prevent the wiper from leaving streaks or smears on the windshield when it’s not in use. When the wiper is left up, it can sometimes catch wind and blow around, which can also cause streaking.

Taping it down prevents this from happening. Another reason people might tape down their back windshield wiper is to keep it from freezing in place during cold weather. If the wiper arm is left up, water can collect on it and freeze, which can damage the arm or make it difficult to move when you need to use it.

Taping it down prevents this from happening by keeping water off of the arm.

See also  2014 Toyota Rav4 Transmission Fluid Capacity
Finally, some people just prefer the look of a taped-down wiper! It can give your car a neater appearance, especially if you have a clear windshield cover (like those made by Rain-X) that covers the entire wipers area when they’re not in use.

How Do You Fix a Stuck Windshield Wiper in an Upright Position?

If your windshield wipers are stuck in the upright position, there are a few things you can try to fix the problem. First, check to see if the wiper blades are frozen to the windshield. If they are, thaw them out with a hair dryer or defroster.

Once they’re no longer frozen, try moving them back and forth to see if they’ll budge. If they still won’t move, try spraying WD-40 or another lubricant on the joints where the wipers connect to the arms. This may help loosen them up enough to get them moving again.

If your wipers are still stuck after trying these tips, it’s likely that something is wrong with the wiper motor itself. This is a more serious issue that will require professional repair. In the meantime, you can try covering your windshield with a tarp or blanket when it rains or snows to keep it from getting too dirty.

Why is My Rear Windshield Wiper Not Turning Off?

There are a few reasons why your rear windshield wiper may not be turning off. One possibility is that the wiper motor has failed and needs to be replaced. Another possibility is that there is a problem with the wiper switch itself.

If the switch is damaged or faulty, it may need to be replaced. Finally, there could be an issue with the wiring between the wiper motor and the switch. If any of the wires are loose or damaged, they will need to be repaired or replaced.


If your back windshield wiper is hanging down, there are a few things you can do to fix it. First, try tightening the screws that hold the wiper in place. If that doesn’t work, you may need to replace the entire wiper assembly.

Leave a Comment

Your email address will not be published. Required fields are marked *