The 2019 Toyota Yaris is a subcompact sedan that seats five. It has standard front-wheel drive and a 106-horsepower four-cylinder engine. The Yaris is available in three trims: L, LE, and XLE.
Standard features include 15-inch steel wheels, manual headlights, power windows and door locks with remote keyless entry, cloth upholstery, split-folding rear seats, a height-adjustable driver’s seat, and a six-speaker audio system with Bluetooth phone connectivity.
If you own a 2019 Toyota Yaris, then you know that one of the most important parts of the car is the key fob. The key fob allows you to lock and unlock your doors, as well as start the engine. But what happens when your key fob battery starts to die?
Luckily, changing the battery in your Toyota Yaris’ key fob is a quick and easy process. All you need is a small screwdriver and a new CR2032 battery. First, use the screwdriver to remove the back panel of the key fob.
Then, take out the old battery and replace it with the new one. Make sure that the positive side (the side with the + sign) is facing up before you put the back panel back on.
Once you’ve replaced the battery, your key fob should be good as new!
2016 – 2019 Toyota Yaris Key Fob Battery Change – How To Remove & Replace Remote Fob Key Batteries
2020 Toyota Yaris Key Fob Battery
If you own a 2020 Toyota Yaris, you may have noticed that your key fob is not working as well as it used to. This is most likely due to a dead battery. Luckily, replacing the battery in your key fob is a quick and easy process that anyone can do at home with just a few simple tools.
To begin, locate the small access panel on the back of your key fob. Using a small flathead screwdriver or knife, gently pry open the panel to reveal the battery inside. Once you have located the battery, use a small Phillips head screwdriver to remove the two screws holding it in place.
With the screws removed, simply pop out the old battery and replace it with a new one of the same size and type. Be sure to line up the positive and negative sides of the new battery before inserting it into place. Once the new battery is in place, simply screw it in and close up the access panel.
That’s all there is to it! Your key fob should now be working like new again.
Credit: northcoastkeyless.com
What Type of Battery Does the Toyota Yaris Key Fob Take?
The Toyota Yaris key fob takes a CR2032 battery.
How Do I Change the Battery in My Toyota Yaris 2019 Key?
If you need to change the battery in your Toyota Yaris 2019 key, follow these steps:
1. Start by removing the key cap. There is a small tab on the underside of the key cap that you can press in with a paperclip or similar object.
Once this tab is pressed in, the key cap will come off easily.
2. With the key cap removed, you will see the battery cover. Use a coin or similar object to unscrew the cover and then remove it.
3. The old battery will now be visible. Remove it and replace it with a new CR2032 3V coin cell battery, making sure that the positive side (+) is facing up.
4. Screw the battery cover back on and then snap the key cap back into place.
You’re now ready to go!
What Kind of Battery Does a Key Fob Take Toyota?
A key fob battery for a Toyota typically takes a CR2032 3V coin cell battery. You can find these batteries at any electronics store, as well as some grocery stores and drugstores. Be sure to check the polarity of the battery before inserting it into the key fob, as reversing the polarity can damage the electronic components inside.
How Do You Open a Yaris Key Fob 2019?
Assuming you would like instructions on how to open the key fob for a 2019 Toyota Yaris:
To open the key fob, first locate the release button on the back of the fob. The release button is typically recessed, so you may need to use a pen or other pointed object to press it.
Once the release button is pressed, the bottom half of the fob should come loose from the top half. You can then separate the two halves of the fob and access the battery compartment.
Conclusion
The 2019 Toyota Yaris is a subcompact car that seats five passengers. It has standard front-wheel drive and is available in three trims: LE, XLE, and SE. The LE trim comes with 15-inch steel wheels, LED daytime running lights, power windows and locks, remote keyless entry, cruise control, air conditioning, fabric upholstery, a height-adjustable driver’s seat, a tilt-and-telescoping steering wheel, a 60/40-split folding rear seatback (with trunk pass-through), Bluetooth connectivity and a six-speaker sound system with a USB port.
The XLE trim builds on the LE’s equipment list with 16-inch alloy wheels (with plastic covers), foglights, upgraded exterior trim accents (including chrome door handles), automatic headlights (with LED accent lighting), heated mirrors (with integrated turn signals), variable intermittent wipers (with deicer function for the windshield and washer nozzles), leatherette upholstery (instead of fabric) for the seats and door panels.
The interior gets red stitching on the leatherette seats as well as red ambient lighting. There’s also an eight-way power driver’s seat along with paddle shifters mounted to the steering wheel if you go for the optional six-speed automatic transmission. As far as tech goes there’s an upgraded 7.0 inch touchscreen infotainment system that now supports Apple CarPlay but not Android Auto unfortunately.
