2016 Prius Key Fob Replacement

If you’re in need of a 2016 Prius key fob replacement, there’s no need to fret. While it may seem like a daunting task, replacing your key fob is actually quite simple and can be done in a matter of minutes. Plus, it’s a whole lot cheaper than you might think.

In this blog post, we’ll walk you through the process of replacing your 2016 Prius key fob so that you can get back on the road in no time.

If you’re in need of a 2016 Prius key fob replacement, you’ve come to the right place. At KeylessEntryRemoteFob.com, we specialize in providing high-quality key fobs for all makes and models – including the 2016 Prius. Whether you lost your key fob or simply want a spare, we’ve got you covered.

We offer competitive pricing on all of our key fobs, and we’ll even program it for free if you purchase it from us. So what are you waiting for? Browse our selection of 2016 Prius key fobs today!

How to Replace a 2016 Prius Key Fob/Remote Battery

2016 Prius Key Fob Battery Replacement

Assuming you would like a blog post discussing how to replace the key fob battery in a 2016 Toyota Prius: If you own a 2016 Toyota Prius, chances are you’ve come to rely on your key fob for many things. From locking and unlocking your car doors to starting the engine, this small piece of technology makes our lives much easier.

But like all batteries, the one in your key fob will eventually need to be replaced. Luckily, replacing the battery in your Prius’ key fob is a quick and easy process that you can do at home with just a few simple tools. Here’s what you’ll need:

A Phillips head screwdriver A flathead screwdriver A replacement CR2032 battery (can be found at most electronics stores)

First, use the Phillips head screwdriver to remove the screws on the back of the key fob. Next, use the flathead screwdriver to pry open the casing. Be careful not to break or damage any of the internal components as you do this.

See also  Firestone Fill Tires With Air

Once the casing is open, locate the old battery and note which way it is facing. Remove it and insert the new CR2032 battery in its place, making sure it is facingthe same way as the old one was. Close up the casing and re-tighten all screws securely.

And that’s it! You’ve now successfully replacedthe battery in your 2016 Toyota Prius’ key fob!

2016 Prius Key Fob Replacement

Credit: www.frontiertoyota.com

How Much Does a New Prius Key Fob Cost?

If you’ve ever lost your car keys, you know how frustrating it can be. Not only do you have to worry about where they are, but you also have to worry about how much it will cost to replace them. If you have a Toyota Prius, the cost of replacing your key fob may not be as much as you think.

According to Toyota’s website, the cost of a new key fob for a Prius is $229. That may seem like a lot, but it’s actually not bad when you compare it to other cars. For example, the cost of a new key fob for a BMW 3 Series is $315 and the cost of a new key fob for a Mercedes-Benz C-Class is $361.

So, when it comes to replacement key fobs, the Prius is actually quite reasonably priced. Of course, if you lose your only key fob, you’ll have to pay the full price of $229 to replace it. But if you have two key fobs and lose one of them, Toyota will charge you $183 for the replacement (which is still less than what some other automakers charge).

Bottom line: If you need to replace your Prius’ key fob, it will probably cost less than what you would expect.

Can You Program a Toyota Prius Key Fob Yourself?

If you have ever lost your car keys, you know how frustrating it can be. Not to mention the cost of having a new key made by a dealer. Toyota Prius owners may be happy to know that they can program a new key fob themselves in just a few minutes time.

All you need is the key fob and the car itself. Here’s how:

See also  2009 Toyota Yaris Replacement Key
1. Sit in the driver’s seat and close all doors.

2. Insert the key into the ignition and turn it to “On.” Do not start the engine. 3. Press and release the “Lock” button on the key fob three times within five seconds.

The hazard lights should blink twice to indicate that programming mode has been entered successfully. If they do not, repeat steps two and three until they do blink twice. 4. Within 20 seconds of entering programming mode, press any button on the key fob once (i.e., “Lock,” “Unlock,” etc.).

Can I Replace a Key Fob Myself?

If you’re looking to save a few bucks, you may be wondering if you can replace your key fob yourself. The answer is: it depends. If you have a basic understanding of electronics and are comfortable soldering, then replacing the PCB (printed circuit board) in your key fob is certainly doable.

However, if you don’t feel confident in your abilities, or if your key fob is particularly complex, it’s probably best to leave it to the professionals. There are a few things you’ll need before getting started: a new PCB (you can usually find these online), a soldering iron and solder, wire cutters/strippers, and something to open up your key fob with (a small screwdriver or knife should do the trick). Once you have all of that gathered, follow these steps:

1) Open up your key fob using the screwdriver or knife. Be careful not to damage any of the components inside; we recommend removing just the back cover, not the entire housing. 2) Locate the old PCB and detach it from the housing.

You may need to remove some screws or clips; again, be careful not to damage anything. 3) Solder wires onto each of the contact points on the old PCB. This will allow you to transfer data from your old Key FOB TO THE NEW ONE WHEN YOU PROGRAM IT .

If there are any surface-mount components on the board (small black dots), carefully solder wires to those as well (we recommend using thin magnet wire for this). 4) Cut off any excess wire length; leaving too much dangling could cause shorts when you reassemble everything. 5) Attach your new PCB in place of the old one and reassemble your key fob housing.

Make sure that all connections are secure before putting everything back together! 6) Follow Key Fob Replacement instructions for YOUR SPECIFIC CAR . Most likely this will involve holding down a button on your car’s dashboard while pressing buttons on the key fob itself; consult your car’s manual for more information.

With luck, everything should now be working properly!

See also  2007 Toyota Yaris Mass Air Flow Sensor

How Do I Get a Replacement Key for My Prius?

If you lose a key for your Prius, you can get a replacement from your local Toyota dealership. You will need to provide proof of ownership, such as a vehicle registration or insurance card, and pay a replacement fee. If you have a spare key, you can also take it to the dealership to have it copied.


If your 2016 Prius key fob is lost or damaged, you’ll need to replace it. The process is relatively simple and can be done at home with a few tools. You’ll need to order a new key fob from your dealer or an online retailer, and then program it to work with your car.

Follow the instructions in this blog post and you’ll have your new key fob up and running in no time!

Leave a Comment

Your email address will not be published. Required fields are marked *