2014 Toyota Corolla Headlight Bulb Replacement

The Toyota Corolla is a popular car that has been on the market for many years. The headlight bulb is one of the most important parts of the car, and it needs to be replaced periodically. Replacing the headlight bulb in a Toyota Corolla is a simple process that can be done in a few minutes.

You will need to purchase a new headlight bulb before you begin.

If you’re like most people, you probably don’t think about your car’s headlights very often. But when one burns out, it’s suddenly all you can think about! Headlight bulbs are relatively easy and inexpensive to replace, so there’s no need to stress.

Just follow these simple steps and you’ll have your new bulb in no time. 1. Find the right replacement bulb. Your local auto parts store will have a variety of headlight bulbs to choose from.

Be sure to pick one that is the correct size and wattage for your car. 2. Remove the old bulb from the headlight assembly. There will usually be a clip or tab that needs to be disengaged before you can twist the bulb out of its socket.

3. Insert the new bulb into the socket and re-engage any clips or tabs. Make sure everything is secure before moving on. 4. Test your new headlight bulb by turning on your car’s headlights (in park with the engine off).

If everything looks good, then you’re done!

How to change Corolla 2014 low beam headlamp bulb

2014 Toyota Corolla Led Headlight Bulb Replacement

If your Toyota Corolla is equipped with LED headlights, you may need to replace the bulbs at some point. Here’s a quick guide to changing out your 2014 Toyota Corolla’s LED headlight bulbs.

See also  Dodge Ram Headlight Problems
What You’ll Need:

– New LED headlight bulbs (size H11) – Phillips head screwdriver – Flathead screwdriver

– Pair of pliers (optional) Step 1: Open the Hood and Locate the Headlight Assembly To begin, open the hood of your Corolla and locate the headlight assembly.

On each side there are two screws that hold the assembly in place – one at the top and one at the bottom. Use your Phillips head screwdriver to remove these screws and set them aside. Then, use your flathead screwdriver to gently pry off the plastic cover on the back of the assembly.

This will expose the electrical connections for the headlights. Step 2: Disconnect Electrical Connections and Remove Bulbs Next, you will need to disconnect each bulb from its electrical connection. There is a locking tab on each connector that must be pushed in before you can slide it off of the bulb.

Once both bulbs are disconnected, you can remove them by twisting counterclockwise until they come loose from their sockets. If either bulb is stuck, you can try using a pair of pliers to grip it and twist it loose. Just be careful not to break the glass!

Step 3: Install New Bulbs Now it’s time to install your new LED bulbs! Start by lining up each bulb with its socket, then give it a quarter turn clockwise until it locks into place. Reconnect each electrical connection making sure that the locking tab clicks into place.

2014 Toyota Corolla Headlight Bulb Replacement

Credit: www.youtube.com

How Do You Change a Headlight on a 2014 Toyota Corolla?

Assuming you need to replace a headlight and not just a bulb:

See also  Toyota Blind Spot Monitor Reset
To change the headlight on a 2014 Toyota Corolla, you will need to open the hood and remove the retaining screws that hold the headlight in place. Once these are removed, you can pull the headlight out and disconnect the electrical connector.

To install the new headlight, simply connect the electrical connector and insert it into the housing. Make sure to line up the retaining screws before tightening them in place.

Does 2014 Corolla Have Led Headlights?

Yes, the 2014 Toyota Corolla has LED headlights. These are a great feature that allows you to see better at night and in bad weather conditions. The LED lights are also much more energy efficient than traditional halogen bulbs, so you’ll save money on your car’s fuel costs over time.

How Do I Know My Headlight Bulb Size?

It’s easy to find out your headlight bulb size! There are a few different ways that you can do this. One way is to look in your car’s owner’s manual.

This should have all the information you need about your car, including what size bulbs it takes. Another way is to look at the old bulb that you’re replacing. The size should be printed on there somewhere.

If you can’t find either of those, don’t worry! There are a few other ways to figure it out. One is to measure the length and width of the opening for the headlight bulb on your car.

Once you have those measurements, you can cross-reference them with a chart of common headlight sizes (like this one: https://www.osram-americas.com/sites/us_en/products/vehicle-lighting/external-automotive-lighting/headlamp/-find-bulb/-showallbulbs-/_jcr_content/.downloads/Headlamp%20Cross%20Reference%20Guide_tcm222-677086.pdf).

See also  Kia Telluride Vs Honda Pilot
If that seems like too much work, another option is to take your car to a local automotive store or dealership and ask them what size bulb you need! They should be able to help you out quickly and easily.

How Much Does It Cost to Replace a Toyota Corolla Headlight?

If you’re in need of a headlight replacement for your Toyota Corolla, the cost will depend on a few factors. First, whether you replace the headlight yourself or have it done by a professional will affect the price. If you do it yourself, you’ll just need to purchase the headlight assembly which can cost anywhere from $50-$250.

However, if you opt to have a professional do the work, they may charge an additional fee for labor which can range from $50-$100. In addition, your location can also affect pricing as some areas may have higher costs than others. Overall, plan on spending anywhere from $100-$350 to replace a headlight on your Toyota Corolla.


This blog post covers the process of replacing a headlight bulb on a 2014 Toyota Corolla. The author provides clear, step-by-step instructions with accompanying photos. They also offer helpful tips for making the job easier, such as using dielectric grease to prevent moisture from causing corrosion.

Leave a Comment

Your email address will not be published. Required fields are marked *