2010 Prius Headlight Adjustment

If you own a 2010 Prius, you may have noticed that the headlights are not properly aligned. This is a common problem with this model year and can be easily fixed. The first thing you need to do is locate the adjustment screws.

There are two of them, one on each side of the headlight assembly. Use a Phillips head screwdriver to turn them clockwise or counterclockwise until the headlights are pointing in the desired direction.

If you own a 2010 Prius, you may have noticed that your headlights are not pointing in the same direction. This is because the headlight adjustment screws are located in a different place than on other cars. To adjust your headlights, you will need to remove the two plastic covers on the front of the car.

Behind these covers, you will see two screws that can be turned with a Phillips screwdriver. Turning these screws will adjust the aim of your headlights. If your headlights are still not pointing in the right direction after adjusting them, you may need to take your car to a mechanic or dealer to have them readjusted.

How To adjust headlights on Toyota Prius

Prius Headlight Problem Fix

If you’ve been experiencing problems with your Prius headlights, there is a fix. The problem lies in the headlight control module, which needs to be replaced. This is a pretty easy fix that can be done at home, and it shouldn’t take more than an hour or so.

Here’s what you’ll need: -A new headlight control module (available online or at your local Toyota dealership) -A Phillips head screwdriver

-A flathead screwdriver -A 10mm socket wrench with an extension Remove the two screws that hold the plastic cover over the fuse box using the Phillips head screwdriver.

Gently pull back on the cover to remove it and expose the fuses. Find the fuse labeled “HEAD” and use the flathead screwdriver to remove it. Set it aside; we won’t be needing it anymore.

See also  Toyota Hybrid System Malfunction

Using the 10mm socket wrench, loosen and remove the three bolts that hold the headlight control module in place. Carefully disconnect the wiring harness from the back of the old module and plug it into the new one. Reverse these steps to bolt everything back into place, making sure to reinstallthe HEAD fuse when you’re finished.

And that’s all there is to it! With this simple fix, you should have no more trouble with your Prius headlights.

2010 Prius Headlight Adjustment

Credit: www.youtube.com

How Do You Adjust the Headlights on a Toyota Prius?

If your Toyota Prius headlights are out of alignment, you can adjust them yourself in just a few steps. First, park your car on level ground and turn off the engine. Then, open the hood and locate the two adjustment screws on the back of each headlight assembly.

To raise the headlights, turn the screws clockwise; to lower them, turn the screws counterclockwise. Finally, test your lights to make sure they’re properly aligned before driving.

Where are the Headlight Adjustment Screws?

If your headlights are pointing too high or low, you can adjust them using the screws on the headlight assembly. There are usually two screws – one for vertical adjustment and one for horizontal adjustment. To adjust your headlights, start by finding a flat surface to park your car on so that you can get a good look at the beams.

Then, locate the adjusting screws on the headlight assembly – they’re usually located near the bottom of the headlights. For vertical adjustment, use a Phillips screwdriver to turn the lower screw clockwise to move the beam down, or counterclockwise to move it up. For horizontal adjustment, use a flathead screwdriver to turn the upper screw clockwise to point the beam to the right, or counterclockwise to point it to the left.

Make small adjustments and test-drive your car after each adjustment until you find the perfect position for your headlights!

See also  2008 Rav4 Engine Replacement

How Do You Turn on the Headlights on a 2010 Prius?

Assuming you would like a blog post discussing how to turn on the headlights on a 2010 Prius: “How to Turn On the Headlights in a 2010 Prius” Headlights are an important safety feature of any vehicle.

They allow you to see and be seen, especially during nighttime driving or inclement weather. Here’s a quick guide on how to turn on the headlights in your 2010 Prius. To turn on the headlights in your 2010 Toyota Prius, first locate the headlight switch on the lower left portion of your steering column.

The headlight switch is usually marked with a light symbol. Once you’ve found it, rotate the knob clockwise until you hear a click. This will turn on your low beams.

If you want to use your high beams, rotate the knob again until you hear another click. You can also activate your high beams by pulling the lever towards you. It’s important to note that fog lights are different from regular headlights.

In most cases, fog lights are activated by pushing a button or toggle located near the headlight switch. However, some cars have automatic fog lights that activate automatically when conditions warrant it—such as when visibility is reduced due to heavy rain or fog. If you have any questions about how to operate your car’s headlights (or other features), consult your owner’s manual or contact your local Toyota dealer for assistance.

Why are Prius Headlights So Dim?

When it comes to headlights, there are a few factors that can affect how bright they are. For example, the type of headlight bulb and the reflectors in the headlight assembly can play a role. With that said, many people have complained that the headlights on the Toyota Prius are particularly dim.

There could be a few reasons for this. One possibility is that Toyota intentionally made the headlights on the Prius dimmer than other cars in order to improve fuel efficiency. It’s been theorized that brighter headlights use more energy, which would in turn hurt fuel economy.

Whether or not this is true is up for debate, but it’s certainly possible that Toyota designed the Prius’ headlights with fuel efficiency in mind.

See also  How Do I Know If My Kia Has Remote Start
Another possibility is that the dimness of the Prius’ headlights is simply a result of poor design or manufacturing quality. This isn’t necessarily Toyota’s fault – after all, even the best companies make mistakes sometimes – but it’s something to keep in mind.

If you’re concerned about your Prius’ headlights being too dim, there are a few things you can do to try and fix the problem. First, make sure that your headlight bulbs are clean and free of dirt or debris; sometimes just cleaning your headlight bulbs can make them seem significantly brighter. You can also try adjusting your headlight aim; if your headlights are pointing too low, they’ll seem dimmer than they actually are.

Finally, if none of those solutions work, you may need to replace your headlight bulbs with brighter ones. In short, there could be a few reasons why your Prius’ headlights seem dimmer than other cars’. It might be intentional on Toyota’s part (to improve fuel efficiency), or it could be due to poor design or manufacturing quality.


If you own a 2010 Prius, you may have noticed that the headlights are not properly aligned. This is a common problem with this model and can be easily fixed. Here’s how to adjust the headlights on your 2010 Prius:

First, park your car in a level surface and turn on the headlights. Then, using a Phillips head screwdriver, loosen the two screws that hold the headlight assembly in place. Next, aim the headlights at a wall or other flat surface about 25 feet away.

Finally, tighten the screws until the headlight is securely in place.

Leave a Comment

Your email address will not be published. Required fields are marked *