Monday to Saturday - 8:00 -17:30

The 2010 Toyota Prius is a hybrid electric vehicle that was introduced in 2009. The car has a 1.8L gas engine and an electric motor. The Prius is capable of running on either gasoline or electricity, and it will automatically switch between the two depending on which is more efficient at the time.
One of the features of the car is the dash display, which shows information such as the current speed, fuel level, and remaining battery power. However, some owners have reported that their dash display stopped working after a few months.
If you own a 2010 Prius, you may have noticed that the dash display is not working. This is a common problem with this model year and can be caused by a few different things. First, check to see if the fuse for the dash display is blown.
If it is, replace it and see if that fixes the problem. If not, then there are a few other things you can try.
One thing you can try is to reset the system by disconnecting the battery for a few minutes.
This will sometimes clear up any issues with the dash display. If that doesn’t work, then you may need to replace the entire dash assembly. This is not a difficult job, but it will require some disassembly of your car’s interior.
If you’re still having trouble with your dash display, then it’s time to take your car to the dealer or a qualified mechanic and have them diagnose the problem. In most cases, they should be able to figure out what’s wrong and get your dash working properly again in no time!
Fix 3rd Generation Toyota Prius No Fuel Gauge Mileage Hybrid System Display On Dash
Prius Dashboard Display Not Working
If you own a Toyota Prius, you may have experienced an issue with your dashboard display not working correctly. This can be a frustrating problem, as the display is an important part of the vehicle’s operation. There are a few things that could cause this problem, and luckily there are also some easy solutions.
One possible reason for the problem is that the fuse has blown. The fuse box is located under the hood, and you will need to check the fuses using a voltmeter or by looking at them with a flashlight. If one of the fuses is blown, simply replace it with a new one and see if that solves the problem.
Another possibility is that there is a loose connection somewhere in the system. You can check all of the connections by opening up the dash panel and inspecting them visually. If you see anything that looks loose or damaged, tighten it up or replace it as necessary.
If neither of these solutions works, then there may be an issue with one of the components in the system itself. In this case, it will likely need to be replaced by a professional mechanic or dealership service department. Hopefully one of these solutions will get your Prius dashboard display working correctly again soon!

Credit: www.reddit.com
What Causes the Display Screen in a Prius to Go Out?
If you own a Toyota Prius, you may have experienced an issue with the display screen going blank. There are a few different things that can cause this to happen, and it’s important to know what they are so that you can get the problem fixed as soon as possible.
One of the most common causes of the display screen going blank is a loose connection between the screen and the vehicle’s computer.
This can happen if you’ve recently had work done on your car, or if there’s been a lot of vibration from driving on rough roads. To fix this, simply check all of the connections and make sure they’re tight.
This is usually caused by a blown fuse, which can be easily replaced. If you’re not comfortable doing this yourself, take it to a qualified mechanic or dealership service department and they’ll be able to take care of it for you. Finally, it’s also possible that the problem lies with the software that runs the display screen in your Prius.
If this is the case, then it will likely need to be reset by someone who knows how to do it properly. Again, taking it to a qualified professional is always your best bet when dealing with complex electronic issues like this one.
What Do You Do If Your Prius Dashboard Wont Turn On?
If you’re experiencing an issue with your Prius dashboard not turning on, there are a few things you can do to troubleshoot the problem. First, check to see if the car’s 12V battery is fully charged. If it’s not, try charging it using a jumper cable or portable charger.
Once the battery is charged, try starting the car again to see if the dashboard turns on. If it still doesn’t turn on, there could be an issue with the car’s fuse box or wiring. To rule out these possibilities, you can take your Prius to a certified mechanic for further diagnosis and repairs.
How Do You Reset the Dashboard on a Prius?
If you need to reset your Prius dashboard, there are a few different ways that you can do so. One way is to simply disconnect the battery for a few minutes and then reconnect it. This will cause the system to reboot and should clear any errors that may be causing the dashboard to malfunction.
Another way to reset the dashboard is by using a special diagnostic tool called a Techstream scanner. This device can be plugged into the vehicle’s OBD-II port and will allow you to access the car’s computer system. From here, you can use the Techstream software to perform a variety of functions, including resetting the dashboards.
Finally, if neither of these methods work, you may need to take your Prius to a dealership or qualified repair shop for further diagnosis and assistance.
Why is My Prius Not Showing the Speedometer?
If your Toyota Prius speedometer isn’t working, there are a few possible reasons. It could be a problem with the speed sensor, the wiring to the sensor, or the speedometer itself.
The speed sensor is located on the transmission and measures the rotation of the wheels to determine how fast the car is going.
The wiring to the sensor can become damaged or loose, causing an interruption in the signal. And finally, the speedometer itself could malfunction.
If you’re having trouble with your Prius speedometer, take it to a qualified mechanic for diagnosis and repair.
Conclusion
If you own a 2010 Prius, you may have experienced an issue with the dash display not working. This can be a frustrating problem, but there are a few things you can try to fix it. First, check to see if the display is turned off.
If it is, turn it on by pressing the power button. Next, try adjusting the brightness settings. If that doesn’t work, try resetting the system by holding down the power button for five seconds.
Finally, if none of these solutions work, you may need to take your car to a dealer or service center to have it checked out.