2005 Corolla License Plate Bulb

I have a 2005 Toyota Corolla and the license plate bulb is out. How do I replace it? The first thing you need to do is locate the burned out bulb.

On most vehicles, the license plate bulbs are located in the trunk, near the taillights. Once you have located the burned out bulb, use a Phillips head screwdriver to remove the screws that hold it in place. Be careful not to touch the glass of the new bulb with your fingers, as this can cause it to burn out prematurely.

Use a paper towel or gloves to handle it if possible. Next, insert the new bulb into the socket and screw it in place. Finally, test the new bulb by turning on your headlights and checking to see if it illuminates.

If your 2005 Toyota Corolla has a burnt out license plate bulb, you’ll need to replace it as soon as possible. Don’t worry, this is an easy fix that anyone can do! All you’ll need is a new license plate bulb and a few simple tools.

First, open up your Corolla’s trunk and locate the two bolts that hold the license plate in place. Loosen these bolts with a wrench or socket set, but don’t remove them completely. Next, gently pull on the license plate until it comes loose from the bracket.

Be careful not to drop it! Now that the plate is loose, you should be able to see the back of the license plate bulb housing. There are two tabs that hold the housing in place – one on top and one on bottom.

Gently push down on the top tab and pull outwards on the bottom tab until the housing comes free.

See also  Toyota Celica Lowering Springs
With the housing removed, you can now access the old license plate bulb. Simply twist it counter-clockwise to remove it from its socket, then insert the new bulb in its place (make sure it’s oriented correctly).

Finally, reverse all of your steps to reassemble everything – once everything is back in place, test your new bulb by turning on your headlights!

How To Replace Toyota Corolla License Plate Lamp Bulb

2005 Toyota Corolla License Plate Bulb Size

The 2005 Toyota Corolla uses a 194/168 bulb for its license plate lights. These are standard sizes for most cars, so finding replacements should be easy. If your car came with LED bulbs, then you’ll need to find LEDs in the same size.

To change the bulb, start by removing the two screws that hold the license plate light assembly in place. Then, twist the assembly counterclockwise and pull it out. At this point, you should be able to reach in and unscrew the old bulb.

Put the new one in and screw it in place, then reverse the process to put the assembly back in place.

2005 Corolla License Plate Bulb

Credit: www.amazon.com

What are License Plate Bulbs Called?

Most license plate bulbs are called LED (light emitting diode) bulbs. These are the same type of bulbs that are used in many other applications, such as taillights, brake lights, and turn signals. LED bulbs last much longer than traditional incandescent bulbs and use less power, so they are becoming more popular for all types of automotive lighting.

How Do You Change a License Plate Light on a Toyota Corolla?

Assuming you need to replace the entire light assembly:

See also  Toyota Corolla Lights Wont Turn off
1. Open your trunk and locate the two bolts holding the light assembly in place. 2. Unscrew the bolts with a Phillips head screwdriver and carefully pull the assembly out.

3. Disconnect the wire harness from the back of the light assembly. 4. Take your new light assembly and connect the wire harness to it. 5. Screw in the new light assembly and close your trunk.

How Do You Change the License Plate Light on a 2006 Toyota Corolla?

Assuming you need to replace the entire light assembly: 1. Open your car’s hood and locate the back of the headlight assembly on the driver’s side. 2. On the back of the headlight assembly, there are three screws holding in the license plate light lens.

Use a Phillips screwdriver to remove these screws and take off the lens. 3. Disconnect the electrical connector from the back of the old license plate light bulb by pressing down on the tab and pulling it apart from socket. 4. Remove bulb from socket and insert new one making sure it clicks into place.

Reconnect electrical connector to new bulb.

How Do You Change a License Plate Light on a Toyota?

Assuming you need to replace the entire light assembly: 1. Open your car’s trunk. Locate the two screws holding the license plate light housing in place and remove them with a Phillips head screwdriver.

2. Pull the light housing straight back until it comes out of the socket. 3. Insert the new light housing into the socket and secure it in place with the two screws you removed earlier. 4. Test to make sure the new light is working by turning on your car’s headlights (the license plate lights should come on as well).

See also  Toyota Hiace Diesel Mpg

Conclusion

If your 2005 Toyota Corolla is like most cars, its license plate bulb is part of the taillight assembly. And if one of those bulbs burns out, you’ll need to replace it. Here’s how:

First, open the trunk and remove the two screws that hold the taillight assembly in place. Then, pull the assembly out far enough to access the bulbs. To remove a bulb, first twist it counterclockwise to release it from its socket, then pull it straight out.

To install a new bulb, push it into the socket and twist it clockwise until it’s tight. Once you’ve replaced both bulbs, put the taillight assembly back in place and screw it in securely.

Leave a Comment

Your email address will not be published. Required fields are marked *